Presented by SAME Waterjet
Waterjet cutting machines are popular thanks to their ability to produce high-quality, precision cuts on a range of materials, without the need for heat. This effectively reduces the damage rate on materials caused by heat-affected areas that occurs on other types of cutters (such as laser or plasma cutters).
Most waterjets typically have 3-axis. Now, there’s a waterjet cutter series that allows for an additional 2-axis for perpendicular movement and rotation. These new 5-axis waterjet cutters allow you to cut through more materials faster, with a level of precision that is hard to match.
The 5-Axis Waterjet series by SAME Waterjet is made up of four waterjet cutting machines: The G3020 AC5X Waterjet, the G4020 AC5X waterjet, and the C4020-AC5X waterjet. This series allows you to cut through steel, porcelain, marble and granite.
This waterjet has an AC 5-axis head, making it ideal for cutting complex 3D parts and through different metals such as titanium, copper, hardened steel, aluminium and more. This system saves energy and is highly efficient with high-moving speed up to 6000mm/minute!
G3020 AC5X Quick Specs
Model |
G3020-50HE-AC5 Axis |
Ideal Materials |
Metals |
Processing Range |
3000x2000mm |
Z-Axis Travel |
150mm |
Bevel Cutting |
±45° |
Max Pressure |
420MPa/4200bar/60000PSI |
Cooling System |
Air Cooling |
Type |
Gantry Cutting Table |
The G4020 AC5X is a gantry waterjet machine with a large cutting table and an x-axis up to 150mm which makes this a popular machine for cutting marble, as well as porcelain or sintered stone countertops.
G4020 AC5X Quick Specs
Model |
G4020-50HE-AC5 Axis |
Ideal Materials |
Marble, Porcelain, Sintered Stone |
Processing Range |
4000x2000mm |
Z-Axis Travel |
150mm |
Max Pressure |
420MPa/4200bar/60000PSI |
Cooling System |
Air Cooling |
Type |
Gantry Cutting Table |
The C4020 AC5X waterjet cutting machine is very similar to its gantry counterpart, however this machine utilises a cantilever cutting table. This provides an exceptional advantage of a much easier load of material sheets, ensuring higher efficiency and less work for your team both before and after cutting.
C4020-AC5X Quick Specs
Model |
C4020-50HE-AC5 Axis |
Ideal Materials |
Sintered Stone |
Processing Range |
4000x2000mm |
Z-Axis Travel |
150mm |
Bevel Cutting |
±45° |
Max Pressure |
420MPa/4200bar |
Cooling System |
Air Cooling |
Type |
Cantilever Cutting Table |
There are many benefits to 5-axis waterjet cutting systems, including higher versatility, cleaner cuts, more cost-effective, less noise, safer operation, and easy maintenance. As the manufacturer of these systems, SAME Waterjet can customise the machine to your specific requirements, and provide local support including assistance with commissioning and training.
If you’re in the market for 5-axis waterjet cutting machines, see what SAME Waterjet has available here.
Presented by Cox Automotive Australia & New Zealand Two mining auctions will be held from…
Presented by MECBIO In a significant move set to reshape the landscape of waste management…
Presented by: Earthmoving Equipment Australia Case is a brand known for power, durability and performance.…
Presented by: Benabilla Auctions In today’s fast-paced marketplace, buyers demand more than just a transaction;…
Presented by: MECBIO MECBIO, a leading provider of mechanical and biological waste recovery solutions, is…
Presented by: Excision Bandsaw blade tension might seem like a small thing, but it could…