Used 550mm thick and sturdy Heavy Duty Excavator GP Digging & Trenching Bucket suit 22-40 Ton machine.
Condition is used but it has had very little use. There is some wear on the ends of the teeth, but almost zero wear everywhere else. There has been some light pitting on the inside bottom from water sitting in it.
This is a very thick and chunky bucket.
There are extra wear strips (20mm thick) welded on the lower sides (see pics# 4 & 9), and also plenty of wear strips welded underneath for durability (see pic# 10).
The side cutting edges are 35mm thick, and the front cutting edge is 50mm thick, both have almost zero wear.
***Current Headstock configuration:
90mm Pin Diameter, 507mm Pin Center to Pin Center (CtoC), 333mm Between the inside Ear Bosses (which can be shaved back up to 402mm between the Ear Plates if you need more inside width for your hitch or dipper arm to fit in).
Should fit: Daewoo DX300 LC, Daewoo Solar 290LC-V / 300LC-V / 300LC-V SLR, Doosan DX300 / DX300LC-3 / S300LC-V / S470LC-V, Hyundai R250LC-7 / R290LC-7, Kobelco SK220 / SK230 / SK250LC / SK250LC / SK260LC-8 / SK320 / SK330, Komatsu PC300 / PC300 Mighty / PC300-3 / PC300-5 / PC300-6 / PC300-7 / PC300LC-7 / PC340 / PC350 / PC360, Volvo EC240B / EC240C / EC250D.
Maybe fit: Case CX240 / CX290 / CX330, Caterpillar 235 / 322 / 325B w/D Link / 325C w/D Link / 325C w/Mass Linkage / 330B w/D Link / 330C w/D Link / 330C w/Reach Linkage / 330D w/D Link / 330D w/DB Link / D Family Linkage, Halla HE280, JCB JS240 / JS240LC (XO Machines) / JS260 / JS260LC (XO Machines), Kato 1220SE2 / 1250SE / HD700SEV / HD900SEV, Kobelco SK250 / SK290LC / SK300 / SK310 / SK330LC / SK350LC, Link-Belt 240LX / 290LX / 330LX / 3400 QUANTUM / 3900 QUANTUM, Samsung SE240LC / SE240-3, Sumitomo SH220 / SH220-2 / SH220-3 / SH220LC / SH240 / SH290 / SH300-3 / SH300-5 / SH300LC-3 / SH330-5 / SH350HD-3, Volvo EC240 / MX255LS / SE240LC-3 and possibly other machines with similar pin spacings or that have a variable pin spacing hitch (Multi-Hitch).
Dimensions: 606mm Wide (at the teeth), 1760mm Deep, 1265mm High.
Weight: 818kg.
Call if you would like to discuss or to come inspect it.
We are at Pullenvale, 16km west of Brisbane CBD, between Brookfield and Anstead, near Kenmore.
You can pick up, we can deliver to a reasonable distance for an agreed fee, or we can arrange freight within Australia.