2500X1300mm CO2 Laser for Acrylic, Wood, MDF, and Thin Metals

Model No.: CJG-130250DT

Introduction:
Starting off at 1300x2500mm bedsize, the CO2 flatbed laser’s generous dimensions allow you to load a standard 4’x8’ sheet all at once, ensuring you maximize your production capabilities.
The JMC series is available in wattages from 150 to 500 watt RF laser. The JYC series is available with either a 150 or 300 watt glass laser.
Dual servo motor/rack and pinion design resulting in greatly improved speed and acceleration.
Water cooling chiller, exhaust fan, and air assist compressor are all included.
Ideally suitable for making signs and advertising signs, furniture, packing boxes, architectural models, model planes, wooden toys and decorations.

Flatbed CO2 Laser Cutter – Your ideal production partner

When the large format sheets of plexiglass, acrylics, wood, MDF and other materials needs to be laser cut, we would advise to invest in our large format laser cutters.



An extra-large work surface up to 1300 x 2500mm (1350 x 2000mm and 1500 x 3000mm options). This makes it possible to cut large objects at once.



An open bed design allows access to all sides of the table for easy loading and unloading of parts even while the machine is cutting.



The improved motion system features a rack and pinion design and powerful servo motors at each side of the laser table, ensuring the high speed and high precision of cutting.



The laser head can be automatic focus setting, making it quick and easy to change materials between different thicknesses.



The CO2 laser cutting machine is easy to operate and have extensive possibilities to cut a large number of materials with high precision.



With the options of high power CO2 laser and mixed laser cutting head, you can use the laser cutter for both non-metal and thin sheet metal (steel only, consider fiber lasers for other metals) cutting.