508 mm cast iron construction. single or three phase. Proven performer

Specifications

508mm (20”) maximum working width.
200mm (8”) maximum working height.
Driven serrated infeed roller in front of cutterhead.
Driven smooth outfeed roller behind cutterhead.
Anti-kick back device at infeed position.
Two idle rollers in ground cast iron work table, below two driven feed rollers above.
Two idle rollers on top of machine to allow easy return of timber to operator.
Cast iron extensions in front and at rear of work table.
Handwheel rise and fall of work table through four round threaded columns, driven by chain below work table.
Rubber sleeves on all four columns to eliminate dust.
Locking knob to hold table at required height.
Measurement scale and pointer to set table height.
Dust extraction chute on rear of machine of 127mm diameter.
Magnetic push button switch with overload protection.
Three rollers beneath machine for mobility.

Price is ex our Adelaide Warehouse- excludes Freight

Technical Data

Width of work table 510 mm
Length of working table 653 mm
Maximum depth of cut in one pass 4 mm
Minimum length of unbutted workpiece 171 mm
Two feed speeds by gear change 4.8 or 6.2 metres/min
Cutterhead diameter 80 mm
Rotation speed of cutterhead 5000 rpm
Cutterhead and feed drive motor Single Phase 3 hp
Nett weight of machine 430 kgs
Single Phase 3 hp or Three Phase 5hp

Now also available with Spiral TCT Cutter-head - Model MB-508S - $5790.00 + GST 3hp three phase $6200 + GST 5.5HP 3 phase