AMOB SECTION ROLLS | HYDRAULIC | DRO | PINCH TYPE | 80MM SHAFT | HEAVY DUTY | EUROPEAN

Amob section rolling machines are manufactured in Portugal to the strictest quality controls. All machining, welding and assembly are done in house to make sure QC is kept to a very high standard. Amob manufacturers some of the biggest section rolling machines in the world and has a great deal of knowledge in that market segment.

The Amob MAH 80/3AC is a hydraulic dual pinch type machine that can be used both in the vertical or horizontal position without any consideration for the hydraulic tank meaning the tank is a sealed unit and has no issue in wither position. The rolls have a programmable DRO for repeatability.

The support arms are hydraulic and have a very long stroke movement and are also fixed making them a lot more rigid and enabling smaller diameter circles to be rolled over the traditional pivot type support arms.

Both bottom rolls are hydraulic and are a pinch style. A very solid well made set of section rolls!

AMOB MODEL: MAH 80/3 AC

- SPECIFICATIONS/STANDARD EQUIPMENT:

THREE DRIVEN ROLLS
GUIDE ROLLS HYDRAULICALLY ADJUSTED
BOTTOM ROLLS PROGRAMMABLE DIGITAL READOUT
HYDRAULIC ADJUSTMENT OF BOTTOM ROLLS OVERLOAD PROTECTION
HORIZONTAL/VERTICAL WORKING POSITION
FOOT PEDAL CONTROL WITH EMERGENCY STOP
POWER: 7 kW
RPM: 5.5
ROLLS DIAMETER: 245MM
SHAFT DIAMETER: 80
MACHINE WEIGHT: 1650 KG
DIMENSIONS: 1379MM X 1305MM X 1612MM

- STANDARD ROLLS CAPACITY IN MILD STEEL:

FLAT BAR ON FLAT MAXIMUM: 100MM X 20MM 2000 DIA.
FLAT BAR ON EDGE MAXIMUM: 120MM X 30MM 600 DIA.
SQUARE/RECTANGULAR BAR: 45 SQ 1000 DIA.
ROUND BAR: 60 DIA. 1000 DIA.
ANGLE OUTSIDE: 80MM X 80MM X 8MM 1600 DIA
ANGLE INSIDE: 80MM X 80MM X 8MM 1800 DIA
T OUTSIDE:80MM X 80MM X 8MM 1400 DIA.
T INSIDE: 80MM X 80MM X 8MM 1400 DIA.
T ON EDGE: 80MM X 80MM X 8MM 1400 DIA.
UPN 140 OUTSIDE: 1000 DIA.
UPN 140 INSIDE: 1000 DIA

- GENERAL DESCRIPTION & STANDARD EQUIPMENT

Body Steel Construction fully hydraulic 3 rolls section bending machine by means of elliptical movement

Machine operates on horizontal | vertical position

3 Hydraulic Driven Rolls and high torque planetary gearbox

Independent Hydraulic Adjustment of both side bending rolls reducing to minimum the straight edge (pre-bending) on suitable sections.

Automatic Peripheral Speed Compensation (power not scarified)

Mechanical Vertical Guiding Rolls IN-OUT allowing positioning following a wide variety of sections according to their shape and dimension guaranteeing proper guiding while rolling;

Bending Rolls L.E.D. Readouts two electronic digital displays mounted on the operators console indicating position of left and right bending roll (X & Y axis). Stop Position is programmable.

Control Panel from where all machine functions can be controlled

3 Hardened Standard Rolls built in 3 sections each adjustable covering a vast list of profiles as per flat bar on edge and on flat position, T bar, angle profile all kind of bar profiles between others special.

Surface induction treatment in all tools in contact with profile being bent

FR 3 Shafts material

CE Certificate