Atlas Copco PAS200MF Centrifugal Pump

Available as a Canopy or open set - the PAS200MF pumping system consists of a centrifugal pump and a separator, which enables air to be separated from the liquid and be sucked by a vacuum pump - making automatic priming possible. Even with suction heights of several meters the machine rapidly evacuates the air from the suction pipe and starts to pump. Additionally, thanks to the semi-open impeller, the PAS HF range is also suitable for pumping liquids with solids in suspension. For more information - please refer to the attached Atlas Copco PDF brochure

Benefits

Pump - High efficiency: 64% (B.E.P.)
Rapid “dry” priming - Up to a height of 8,5 m (27.5 ft)
High resistance - To abrasive liquids and turbid sandy waters
Semi-open impeller Solids handling up to 76 mm (3")
Diaphragm vacuum pump - Oil free suitable for dry running: no contamination of the environment
Mechanical shaft seal in oil bath - It allows the “dry running” operation of the pump
Wear plate - Cast iron (G10 rubber lined) or stainless steel wear plate, that is easily replaceable)
Easy maintenance - Hinged cover for direct access to the impeller (without lifting devices). Link belt quick to replace on the field.