Briquetting press muetek MPP for continuous operation from Blue vent Australia Pty Ltd
German made
Briquette diameter: 50-80 mm
Front Bush: 50-80 mm
Output (depending on Material): 30 – 550 kg/h
Motor: 5,5-27.5 kW
400 Volt / 50 Hz / 3-Phase
hydraulic pre compression
Option Cooling Clamp: yes, with extra equipment Coolable
Clamp
Cooling of Clamp with watertank (by client)
Option Cooling Hydraulic coil: yes
Option Level-Control: yes
Option long briquette: yes (depending on Material)
.
Requirements for the raw material:
- the water content (ATRO) has to be between 6 % – 18 %
- max. length of the material: 15 mm
- the temperature where the machine is placed has to be at
minimum +5 degrees.
- The supply unit has to be free of metals and mineral
contamination. Otherwise, damages on the pressing tools and
/ or increased requirement of wear parts could be the
consequence.
For more information contact Blue vent Australia Pty Ltd