British REMA MAC 2 Aerosplit Classifier Powder Micron Separator Air Classifier
Max Speed 3300rpm 11kW 2P
This was part of a talcum powder factory.
We also have 2 other Air Classifiers from the same factory listed:
HOSOKAWA IRON WORKS MS-4H Powder Micron Micro-Separator Air Classifier 3.7kW
1300 x 1600 x 1900mm
540kg
The following info has been taken from the British Rema , may not be exact info for this model.
Aerosplit Classifier
The Aerosplit Classifier is a high-efficiency air-swept, dynamic classifier suitable for the processing dry particulate materials with cut point typically in the range 5 to 150 microns and is capable of handling quantities from a few kilograms per hour up to 10 tonnes per hour.
The Aerosplit Classifier is a high-efficiency air-swept,
dynamic classifier suitable for processing dry
particulate materials between 1 and 150 microns and
is capable of handling quantities from 5kgs per hour
up to 10 tonnes per hour. These forced-vortex units
are designed to operate either as an independent,
stand-alone system incorporating a feeder, fan and
product-collection equipment or in closed circuit
within a conventional milling system. The Aerosplit
can be installed in existing air systems with a
minimum of modification and will accurately separate
products of exceptional fineness over a wide range
of feed variations.
The Aerosplit Classifier range of equipment is widely
used for controlling particle size in the chemicals,
ceramics, metal powders, minerals, plastics and
recycling industries.
Features and benefits
• High-efficiency air classifier
• Particle size cut-point in the range 1 to 150 microns
• Excellent sharpness of cut
• Precise on-stream control of cut-point by variation
of rotor speed and airflow
• Low system resistance
• Low power consumption
• Adjustable secondary air-wash system for
optimisation of classification efficiency
• Operates under negative pressure promoting
dust-free environment
• Robust construction and build quality for long
service life
Contact and inspection of goods
Please contact Tim Marshman with any questions. This item may be inspected by appointment at 9 Vernon Smith Court, Ottoway, South Australia address.