DOPPSTADT AK 315 Mobile Shredder

As the smallest mobile shredder in the AK series, the AK 315 can be used for almost all shredding tasks. The new MTU engine with 230 KW even meets the latest emissions standard Stage V.

APPLICATIONS
- Old wood
- Green waste
- Compost
- Commercial waste
- Substitute fuels - EBS
-Agricultural residues

SPECIAL FEATURES
The AK 315 can be used flexibly and universally. It can shred old wood, wooden pallets, green waste, organic waste, logs and roots, as well as finely shredding substitute fuels. The heavy two-row flail drum can be equipped with different flail tips depending on the material and application. Different material structures can be achieved using the optional fine shredding baskets with mesh sizes of 30 to 320 mm.

The material feed is controlled depending on the load, so that optimum use of the engine power and thus a consistently high throughput are ensured at all times. When a certain limit pressure is reached on the feed roller, automatic reversing occurs. The feed speed of the scraper floor can be manually adjusted depending on the material requirements.

The optionally available lowerable rear discharge belt can be easily folded in and out hydraulically and lowered for maintenance work on the flail drum. The discharge height of over 3.5 m makes it easy to transfer the shredded material to subsequent machines or containers.

The powerful, modern diesel engine from MTU has electronic torque optimization and has high torque with low fuel consumption. The large, slow-running fan wheel ensures a low noise level during operation.

The new decentralized electrical system offers a high level of diagnostic capability and therefore better support in the event of a service call.

ADVANTAGES
-Latest engine and exhaust technology, compliance with exhaust standard Stage V, exhaust system made entirely of stainless steel, covered with the highest quality integral insulation
-Freely swinging flails of the flail drum, with a flywheel mass of approx. 1.3 t, have quickly individually exchangeable flail tips that are adapted to the material specifically (e.g. hard metal or armored tips)
- Insensitive to foreign matter due to freely swinging hammers, continuous shredding due to load-controlled material feed
- Lowerable rear conveyor for shortest set-up times and maximum accessibility and ease of maintenance to the flail drum, tools or rear basket
- Rear conveyor length 6 m
- Replaceable fine shredding basket*, the material grain size is determined by the mesh size (30 – 320 mm), special baskets* with 3D technology for the use of old wood for more structure in the end product (*optional)
- Ideal for smaller systems