Digga 2 Speed High Flow 20-50T Auger Drives

Digga’s 2 speed drilling auger drives for High flow machines have been designed for a wider range of applications. Offering a high speed, low torque setting for the smaller auger jobs when you need that extra RPM, and low speed, high torque for when you really need to grind out that larger diameter hole. It’s like having 2 drive units in 1.

Two speed drives suit excavators & skid steer loaders, truck cranes, front end loaders, wheeled loaders, and backhoes.

Improved motor design & performance with 2 Speed options:
Low speed – High torque for large holes
High speed – Low torque for smaller holes
Suitable for a wide range of ground conditions:
Soft loose soils, hard soils, and rocky conditions
Integrated PRV (Pressure Relief Valve)
Simple electrical connection:
12 or 24 volt coil, just requiring connection
Optional joystick switches, floor mounted switches & cigarette plugs available pre-wired to suit
Low maintenance with 5yr gear box and 3yr motor warranty

PDT25
Rec Flow Range: 40-180 lpm
Nominal Torque: 27373 Nm
Motor: Vis EATON
Pressure Valve Fitted: Included
Energy Control Valve: Optional
Case Drain Required: Yes
Max Pressure: – – – – – Do not exceed 240 bar 150 lpm – – – – –
Max Flow: – – – – – Do not exceed 180 lpm 200 bar – – – – –
Max Continuous Power: – – – – – Do not exceed 60 Kw (80 hp) – – – – – –
Overall Length: 1217 mm
Diameter: 355 mm
Weight (no frame / hitch): 400 kg
Std Output Shaft: 100 mm Square
Swing Control: Optional
Diggalign: Optional
Rec Auger: 10 / 11 Series
Max Auger Dia Clay / Shale: 1200 mm
Max Auger Dia Earth: 1600 mm
(*) Max/min drilling diameter (DIA) dependant on ground conditions. Guide is a recommendation only.

PDT30
Rec Flow Range: 40-180 lpm
Nominal Torque: 31829 Nm
Motor: Vis EATON
Pressure Valve Fitted: Included
Energy Control Valve: Optional
Case Drain Required: Yes
Max Pressure: – – – – – Do not exceed 240 bar 150 lpm – – – – –
Max Flow: – – – – – Do not exceed 180 lpm 200 bar – – – – –
Max Continuous Power: – – – – – Do not exceed 60 Kw (80 hp) – – – – – –
Overall Length: 1217 mm
Diameter: 355 mm
Weight (no frame / hitch): 400 kg
Std Output Shaft: 100 mm Square
Swing Control: Optional
Diggalign: Optional
Rec Auger: 10 / 11 Series
Max Auger Dia Clay / Shale: 1200 mm
Max Auger Dia Earth: 1800 mm
(*) Max/min drilling diameter (DIA) dependant on ground conditions. Guide is a recommendation only. (*) Max/min drilling diameter (DIA) dependant on ground conditions. Guide is a recommendation only.

PDT40
Rec Flow Range: 40-180 lpm
Nominal Torque: 33733 Nm
Motor: Vis EATON
Pressure Valve Fitted: Included
Energy Control Valve: Optional
Case Drain Required: Yes
Max Pressure: – – – – – Do not exceed 240 bar 150 lpm – – – – –
Max Flow: – – – – – Do not exceed 180 lpm 200 bar – – – – –
Max Continuous Power: – – – – – Do not exceed 60 Kw (80 hp) – – – – – –
Overall Length: 1217 mm
Diameter: 355 mm
Weight (no frame / hitch): 400 kg
Std Output Shaft: 100 mm Square
Swing Control: Optional
Diggalign: Optional
Rec Auger: 10 / 11 Series
Max Auger Dia Clay / Shale: 1500 mm
Max Auger Dia Earth: 1800 mm
(*) Max/min drilling diameter (DIA) dependant on ground conditions. Guide is a recommendation only.

PDT50
Rec Flow Range: 40-180 lpm
Nominal Torque: 39224 Nm
Motor: Vis EATON
Pressure Valve Fitted: Included
Energy Control Valve: Optional
Case Drain Required: Yes
Max Pressure: – – – – – Do not exceed 240 bar 150 lpm – – – – –
Max Flow: – – – – – Do not exceed 180 lpm 200 bar – – – – –
Max Continuous Power: – – – – – Do not exceed 60 Kw (80 hp) – – – – – –
Overall Length: 1217 mm
Diameter: 355 mm
Weight (no frame / hitch): 400 kg
Std Output Shaft: 100 mm Square
Swing Control: Optional
Diggalign: Optional
Rec Auger: 10 / 11 Series
Max Auger Dia Clay / Shale: 1500 mm
Max Auger Dia Earth: 1800 mm
(*) Max/min drilling diameter (DIA) dependant on ground conditions. Guide is a recommendation only.