CICLONE dust suppression machine Model CM 408 AP “HYBRID” ELECTRONIC PLC - remote control - standard configuration TECHNICAL DESCRIPTION
Model CM408 with Electronic PLC and Touch Screen for total management of functions on board the machine.
Programming of work shifts
Water throw distance - Maximum distance 45-50 m (147-164ft) (wind may affect the distance)
Water consumption - 35 l/min (9.2 gal) with 10bar LP pump - 15l/min (3.9 gal) with 70bar High Pressure pump. (option 2)
Nozzles Crown - 45 self-cleaning stainless steel nozzles mounted on 1`` stainless steel ring pipe, single delivery feed controlled by solenoid valve.
Droplets size - 20>180 ?m (the size of the drop may vary depending on the job)
Turbine rotation - 340° automatic on electromechanical slewing ring with servomotor, electronically programmable by PLC
Turbine tilting - automatic from -20° + 50° with servo actuator controlled by PLC and/or remote control
Turbine fan - Die-cast aluminium fan with 5-blades variable geometry, fan Ø 660mm (26 in), flow conveyors, 7.5Kw (10HP) three-phase asynchronous motor, 2800 rpm driven by electronic Soft-start device.
Tot. Power installed - 11KW for model configuration A) and B) , 12,5 KW for model configuration C)
Power supply - 400V 50Hz - Electrical panel protected by an additional watertight box in stainless steel.
Prearranged watertight inlet socket 32A -5 poles to connect the machine to the mains.
Turbine air flow - 10000 m3/h
Noise Level - 93lwa = 70db a 10 mt. (32.8 ft)
Remote control - Radio remote control 12 channels for complete remote management of the machine, max 100mt,
and remote PLC programming for all machine functions. Receiver on board the machine.
Supporting structure - Electrowelded and hot-dip galvanized thick steel tube and box.
Standard configuration
A) ON FIXED BASE ( Dim, L800XP1000XH2000 - Weight 380kgs ) (L 2.6xP 3.2xH 6.5 - weight 837lb)
B) WITH HYDRAULIC ARM Height 6mt ( Dim, L1500XP1700XH2400 - Weight 790kgs ) (L4.9xP5.5xH7.8 weight 1741lb)
All All configurations are equipped with housing for lifting with forklift/telescopic forks, Courtesy light, safety flashing light, start buzzer.
Max covered area - 5700 m2 - 61350sq/ft WATER SUPPLY
High Pressure Electric pistons Pump 70bar , single water delivery controlled by solenoid valves, 5.5KW three-phase asynchronous motor – Auxiliary valve for discharge and direct water tank connection Self-priming water withdrawal for pressureless inlet or drop feed from water tank.
Auxiliary valve for discharge and direct water tank connection - pressure switch
Hydraulic connection - Quick connection 1.5`` in. VR UNI45, Camlock
Inlet water filtration - Brass filter holder with stainless steel filter cartridge with Triple INOX micro-retina filtering system.
Accessible and easy to inspect filter for periodic cleaning.
Filtration grade - 150 ?m – 100Mesh
Safety systems - Automatic stop of the machine in absence of water, Automatic emptying of the system at the end of the cycle with function that can be excluded manually.
Water type - industrial, well, fire-fighting ring, purifier, aqueduct, rainwater harvesting.
Finer Hydraulics stands as Melbourne's premier hydraulic repair service and machinery provider. Our fully-equipped workshop ensures an unparalleled service experience. Specializing in cylinder repair and general hydraulic services, we address tasks ranging from resealing to major machine refurbishments covering a wide range of industries including mining, earthmoving, construction, demolition, recycling, landscaping, and road construction. Our commitment extends to offering Australian made Hydrapower attachments, Ciclone dust suppression fog cannons, and Italian SIMA concrete mixers for sale or hire, setting a gold standard for quality and convenience in Melbourne's hydraulic industry.
Go the the Finer Hydraulics showroom to see the rest of our equipment, send Finer Hydraulics a message about the item that you are interested in or give Finer Hydraulics a call, we are happy to answer any of your questions.