Dymaxion PCD3300 Core Drill – Up to Ø350 mm Concrete Drilling

This heavy duty core drill design has been available for many years and still represents a simple but effective machine for cutting larger diameter cores. The machine requires a 15AMP power supply either from the mains or can be operated via suitable generators on work sites.

The core drill stand will angle down to horizontal and is recommended for bolting down and not for use with vacuum hold down system. Despite the weight at 56.5 KG the two sturdy wheels make on site locating easy work and fitted with a sky hook for power lifting onto transport. At 90° the rig lift height is 700mm allowing long core drill bits to make single cuts without adding extension rods.


Specifications:

Power: 3300 watts
Voltage: Available in 110V and 220V configurations
No-Load Speeds:460/900 rpm
Maximum Drilling Diameter in Concrete: Up to 350 mm
Spindle Fitting: 1 ¼” UNC
Net Weight: 56.5 kg

Additional Features:
Mechanical clutch
Overload protection
Water swivel for efficient cooling and dust suppression
Requires a 15 AMP power supply