Gau Jing - 4 Side Planer and Moulder - GA Series
Heavy duty four side machine for timber planing and profiling. Planing width 10—230mm , Planing thickness 7-160mm. Feed speed 6-36m/min. Optional programmable setting.
STANDARD EQUIPMENT:
• Automatic feeding magazine.
• Digital position controller.
• Groove guide table.
• CE regulation.
• Spindle diameter 50mm,1 13/16,2 1/8".
• Spindle speed 8000 RPM.
• ATS system.
• Extend infeed worktable length.
• Universal spindle.
• Feed speed 6-60m/min(15-30HP).
• Feed speed 8-80m/min(25-40HP).
• Spindle motor increase(15-40HP).
• Infeed upper pressure roller with air pressure,
• Side pressure roll with air pressure
• Pressure board in front of top horizontal spindle with air pressure
• Firm support on horizontal spindle
• Straight jointer
• Profile jointer
-CENTRALIZED PRESSURE REGULATION:
All pressure regulations for the entire pneumatic system are centralized at front of the machine for added convenience for pressure regulations.
Sectional pressure adjustments for all pressure rollers ensure consistent pressure.
-VERTICAL SPINDLE ADJUSTMENT UP TO 60 MM:
It allows to fit several tools on the vertical spindle, eliminating troublesome cutter change. The 60mm spindle adjustment provides full utilization for a single cutter.
-CONVENIENT SPINDLE ADJUSTMENT:
All control levers for the spindles are located at the front of the machine for convenient adjustment. Each spindle is provided with a mechanical digital readout, giving accurate adjustment.
-CENTRALIZED LUBRICATION:
The spindles are lubricated by the centralized lubrication system for convenience.
-POWER INFEED TABLE ROLLER:
The roller in the infeed table is powered, providing a smooth feeding effect for feed stock.
-AIR LOADED SIDE PRESSURE WHEELS:
The front side pressure wheel on left vertical spindle fully eliminates unsmooth problem when feeding short or narrow stock. The pressure plate is easy to adjust.
-VERSATILE REAR BOTTOM HORIZONTAL SPINDLE:
Can be fitted with sawblade or planer knife. Changing tools is very convenient.