HIBER GCM006S GELATO BLAST FREEZER
6 Blast Freezer & Rapid chiller
Very low use - in very good condition.
CONSTRUCTION:
External sides and top in AISI 304 18/10 stainless steel th. 0.6mm (Scotch-Brite satin finish)
Door in AISI 304 18/10 stainless steel th. 0.8mm (Scotch-Brite satin finish)
Internal covering completely radiated in AISI 304 18/10 stainless steel
Internal base shaped for containment with central drain for discharge of washing water
High-density expanded polyurethane insulation (about 42 kg/m3), thickness 60mm, without HCFC
Ergonomic handle for the complete door length and magnetic gaskets on the 4 sides of the door
Self-closing doors with block when opened to 100°
Stainless steel feet Ø 2” height-adjustable H 150÷180 mm with anti-scratch cap
Internal fan panel can be opened on side hinges, in order to clean the evaporator
INTERNAL SET-UP:
Shelf or tray racks in 18/10 stainless steel encased on the sides of the cell, easily removable for washing
Core probe, heated on M versions
GASTRONOMY VERSION: Shelf racks in polished stainless steel suitable to support GN1/1 shelves and EN trays (600x400 mm) - Pitch 65mm
PASTRY AND BAKERY VERSION: Shelf racks in polished stainless steel, with 5 pair removable “L” shaped runners, suitable to support EN trays (600x400 mm) - Pitch 50mm or 35mm
GELATO—ICECREAM VERSION: Shelf racks in polished stainless steel, with 1 pair removable “C” shaped runner, 1 stainless steel grid, 4 “L” shaped runner, suitable to support EN trays (600x400 mm) - Pitch 50mm or 35mm
COOL SOLUTIONS FOR PROFESSIONALS
COOLING SYSTEM:
Evaporators with large exchange surfaces, and multiple injection points for high cooling efficiency
High capacity liquid/gas heat exchanger
Copper-aluminum evaporator, protected with non - toxic epoxy resins through cataphoresis
Copper condensing coil with high heat yield aluminum fins
Anti-condensate resistance positioned on the box under the magnetic gasket
Fans with indirect flow onto the product
Hermetic compressor
R404A refrigerant gas
Manual defrosting device and condensation evaporation system without use of electrical energy
COMMANDS, CONTROLS AND SAFETY DEVICES
• Control and command circuit board equipped with high-visibility custom display which highlights the status of the appliance at all times
• Circuit breaker for compressor protection
• Internal fan stop micro switch when door is opened