IMET - BS 300 PLUS - Manual Bandsaw [made in Italy]

Manual bandsaw able to cut both left and right

BS 300 PLUS is the manual bandsaws that can cut both left (up to 60°) and right (up to 45°), a versatile working tool to realize small and medium batch production, a versatile working tool that can be used either in mechanics and steelwork.

Features:

Wide working area
BS 300 PLUS is equipped with a wide diameter working area and a system of automatic easy stops at 0°, 45° and 60° left and 45° right with graduated plate to identify and set different angles.

Opening vice
The vice has adjustable guides, free to move alongside the worktable, with rapid approaching and camping.

Rigid saw frame
Machine saw frame is rigid cast-iron with tubular section, 320 mm pulleys, high blade tension at 1700 kg/cm2 and to avoid an excessive strain on the blade with frontal regulation and microswitch controller.

Easy to use
Safe starting through the button on the handle with warning light to inform the use about the correct machine functioning. Coolant-tank and electro pump are placed inside the floor stand.

Electronic inverter (Optional)
If required, the electronic inverter for variable blade speed allows the operator via keyboard to adjust the machine to be able to cut a wide range of materials and different sections.
The change of speed is via inverter, and it does not affect the power of the engine even at low speeds.

Minimal lubrication system (Optional)
It is possible to require, for all Imet machines, the minimal lubrication system , it avoids the dispersion of refrigerant liquid typical in the use of emulsifable oil, the life of the blade is not in any way affected.

Adapter to synchronise RTP/RTD (Optional)
Adapter to synchronize the RTP/RTD table with saw frame motion.

Laser ray (Optional)