IMET BS 350 GH - Gravity Autocut Bandsaw [made in Italy]

Autocut saw for small and medium productions
The BS 350 GH sawing machine is a highly versatile and reliable machine with autonomous descent for cutting small and medium series productions both mechanical and carpentry for angle cuts up to 45 ° right and up to 60 ° left.

Features:

Electric control
The machine operations are managed by means of an adjustable electric control panel, control LEDs and motor absorption ammeter.

Wide working surface
BS 350 GH is equipped with a wide working space 460 mm diameter with rotating table integral with the sawframe to avoid incisions of the table , rotation on thrust ring with pre-loaded thrust bearing.

Steel sawframe
The sawframe is in steel with a closed tubular section, with 300mm pulleys and hinged blade guard with support piston for quick and easy blade replacement. The machine finishes cutting with the blade tilted to the work surface, reducing the stress on the blade and increasing the performances.

Blade cleaning
To keep the blade always at maximum efficiency, BS 350 GH is equipped with a motorised blade cleaning brush with nylon inserts.

Vice
Sliding transversely to the surface the BS 350 GH vice is positioned on adjustable guides with rapid approach.

Aligning the blade
The ideal alignment of the blade is guaranteed by blade guide with hard metal inserts and additional bearings.

Autonomous cut
BS 350 GH cuts from 0 ° to 45 ° right and from 0 ° to 60 ° left with vertical descent and autonomous cut with adjustable descent speed and stop by microswitch at the end of the cut.