The all new 12m Ute mounted EWP that still allows your UTE to be used as a UTE - with a carrying capacity of between 450kg and 860kg and rear space of 1200mm on a standard Ute tray or up to 2000mm on our custom built tray.
Specifications
Working height 12 m
Outreach 4,5 m
Basket working load limit 150 Kg – 1 person
2 x hydraulic outriggers
Rotation 180°
Full hydraulic controls
STANDARD MACHINE:
• Aerial platform made of high strength steel for boom maximum rigidity and maximum safety while working.
• Hydraulic oil tank in easy to reach position to check and restore the oil level.
• Stability is given by 2 out and down outriggers
• Double purpose turret for boom support and rigidity.
• The pantograph with the aim to open the platform by lifting the telescopic boom. The maximum height of the pantograph coincides with the maximum bridging height. The pantograph is made of 2 booms connected through a knuckle with simultaneous movements.
• The telescopic boom is 1 telescopic extension. Hoses and pipes are positioned inside the boom structure for maximum protection against damages.
• The basket is made to support and protect the operators. The aerial platform can be moved by means of controls positioned on the basket.
• Free space on the rear flat bed for working tools and materials.
• 100% hydraulic controls to allow gradual and accurate movements. The hydraulic system guarantees a long-lasting life to the platform with maintenance costs reduced to its minimum.
• 100% hydraulic system with basket controls in order to grant the maximum reliability and to allow great accuracy in movements.
• Emergency controls from the ground.
• The fully hydraulic controls allow 2 simultaneous movements and provide more sensitivity in progressive and gradual manoeuvres Fully hydraulic controls are free of any damage to electrical components caused by rainy weather, humidity, frequent use, etc.
• Controls levers with automatic return in rest position. The movements of the whole platform are activated by levers, respectively positioned in the following controls panels:
SAFETY SYSTEM:
• Boom / stabiliser interlock
• No outreach limiting systems.
• Emergency hand pump allows for full stowage of booms and stabilisers.
• All movements are obtained through hydraulic double-acting cylinders with double check valves c
• Warning light installed in the truck cab and indicating that the outriggers are not completely down.
• Emergency stop buttons (basket and ground).
• Thermal protective device for the electric system.
• Safety device to prevent the starter connection if the engine is on.
• Boom-cab anti-collision system (buzzer and stop).
stabiliser non stowed lights
BASKET:
• Aluminium basket 800 long x 700 width x 1100mm high
• Automatic leveling of the basket with independent hydraulic circuit
• Engine start & stop from the basket
• Warning light to center the boom in rest position
• 240v inlet on turret and outlet in basket
• Basket access bar with closing system by gravity
• ELECTRIC CLUTCH AND HYDRAULIC PUMP
• Warning light inside the cab to indicate electric clutch activated
• Hour counter in the cab to check the working hours and the frequency of the scheduled tests