Massey Ferguson MF9895 Header with 36ft Draper Front

Machine I.D.: Massey Ferguson MF9895 – Serial # 9895-HTC8289
Engine Hours – 2828 C13 CAT engine Separator Hours – 2606

General Condition: The machine is in fair to good working order. Paint, lights, glass, etc., are all in place.

Chains/Belts/Springs/Pulleys: Some chains have been replaced in the last 12 months. Most belts have been replaced, and a large number of new belts will go with the machine. All pulleys are in good condition, with some replaced in the last two seasons. All springs appear in good condition and are in place.

Tires and Rims: All are in near-new condition except the FLH drive tire, which has cracking around the bead. A new replacement will go with it. Rims are all in good condition with no visible cracking or damage.

Rotor/Feeder and Separating Unit: All in good general condition. New sieves were fitted to the straw walker two seasons ago. Bearings are in good condition, with some replaced on both sides in the last 20 hours. Clean grain elevator chain is in fair condition; the lower bearing was changed out last season. Elevator paddles are in good condition. Repeat grain elevator chain paddles are in good condition.

Hydraulics: All hydraulics and hoses are in good condition with no major or minor leaks or damage. Hydrostatic drives and pumps are in good condition with no leaks.

Main Rotor: The main rotor bearing at the front has no movement. The rotor is in good condition with no damage or cracking by visual inspection. Rasp bars are in good condition and in place. Concaves appear in good condition with no visual signs of cracking and damage.

Feeder House Chains and Bars: In fair to good condition.

Hopper Unit: In good condition. Auger bearings feed well. Bearings in the lower bubbler were replaced this season. Unloading auger is in good condition with no dents or damage. Auger opens and closes as it should.

Front Attachment: A 36FT front in good condition with no bends, twists, or damage. All bars and fingers are good with no signs of bends or damage. All knife guards are in place, and the complete knife bar was replaced last year. All knives appear sharp and in place. No leaks on the cylinder or wobble drive motor.

Main Floor Belt: In fair condition with no rips or tears and works as it should.

Engine C13 CAT: The engine bay is in very good clean condition with no signs of damage, leaks, or issues. All wiring appears in good condition. All coolant hosing is good with no leaks or cracking. Engine mounts are good with no cracking. The fan is in very good condition with no sign of cracking or damage.