Multitool Belt And Disc Grinding Attachment, 915X100mm, 178mm Disc - PO364 by ITM

FEATURES
The Multitool is a renowned, Australian designed belt grinding attachment which can be used on most bench grinders. The technology replaces the grinding wheel and converts a traditional grinder into a sophisticated work station ideal for sanding, grinding, sharpening, shaping, polishing and refinishing.



EFFICIENCY - Superior performance and a user friendly, toolless belt change in under 5 seconds.


VERSATILITY - Grinding, sanding or polishing in 4 positions on rubber contact wheel, platen, disc or free strapping. The unit can also be swivelled vertically or any position in between.


ACCURATE TRACKING - The running position of the belt is simple to adjust and it stays there, allowing for finishing into sharp corners.


QUALITY CONSTRUCTION - Robust, maintenance free with sealed ball bearings, hardened and ground essential components and zinc plating.


3 YEAR WARRANTY - Against faulty materials and workmanship, even when used commercially.







SPECIFICATIONS



36" x 4" wide (915 x 100mm) belt.


7" (178mm) diameter disc.


3 1/2" (89mm) diameter rubber contact wheel.


5 1/2" (140mm) diameter drive wheel.


The 364 suits most popular 8" bench grinders with a screw mounted wheel guard and a minimum of 1/2 HP, though 3/4 HP is recommended.


Suits grinder shafts sizes of 5/8" and 1/2". A steel bush is supplied to adapt the drive wheel to 1/2".


Fitting Kit supplied.