Neumann Equipment trawl winches are compact in design and generally used to deploy and retrieve the main trawl net. These winches have been specifically designed for the offshore commercial fishing industry. They are designed to be a direct replacement for the tried and tested Jaden Series of Winches. We also stock a large range of spare parts to support current and early Jaden models.
The range is based around the proven Jaden series no. 10 design. The drum capacity, haul in/out speeds, torques meet, and in many cases, exceed the previous winch range.
They are manufactured from high-quality components to suit extreme marine conditions and provide many years of dependable service.
All of our trawl winch designs are verified using Finite Element Analysis (FEA). They are Built Tough and Designed to Last!
The following photos of trawl winches have been provided for reference to our capabilities and excellence.
Standard Inclusions:
Reduction drive gearbox.
Fail-safe multi-disc spring-applied brake.
Winch drums are supported with a fully sealed self-aligning bearing.
Neumann Equipment gearbox seal protector.
Rope terminator to suit wire rope.
Overhead hydraulic cylinder driven wire guide.
Carbon steel construction.
All components are of high quality for many years of service.
All components are grit blasted and primed with two-pack epoxy primer and finished with heavy-duty two-pack epoxy polyamine marine coatings.
Available Options:
Maximum Rated Line Pull: 4,000 kg
Rope Capacity: 750 m
Rope Diameter: 16 mm
Maximum Line Speed: 80 m/min
Bare Drum Diameter: 406 mm
Drum Width: 470 mm
Cheekplate Diameter: 1000 mm
Gearbox Type / Ratio: GFT26 / 50.6:1
Hydraulic Motor / Size: A2FE90 – 90cc
Hydraulic Pressure: 201 bar
Maximum Oil Flow Required: 143 L/min
Drum Speed: 31 rpm
Motor Speed: 1591 rpm
Number of Rope Layers: 15
Paint Specification: NE Marine Spec – Lt. Grey
Weight: 705 kg
Facebook
Twitter
Email a Friend
CURRUMBIN WATERS, QLD
Print
******5979 
