New Jea Wen JW400 Excavator Hydraulic Hammer Rock Breaker to suit: 0.8-1.5 ton machine. Great for loosening and breaking up rock, rocky ground, concrete, tarmac, paved areas, demolition etc.
Comes with a 39mm Point Moil, Hoses, Toolbox with various Spanners etc. and a Nitrogen Gas Bottle & Pressure Gauge Kit for regassing the breaker.
The Hitch Headstock currently has 25mm Pins fitted into collar bosses that fit into 45mm diameter Pin holes, so pins up to 45mm diameter can be fitted without needing to bore out the holes in the headstock. The Pin Center to Pin Center is 85mm. The distance between the collar bosses is 91mm. Removing the collar bosses, the distance between the headstock bosses is 136mm, but these welded-on-bosses could also be shaved back on the insides to a maximum of 152mm (the distance Between the Ear Plates), if you need more inside width for your hitch or dipper arm to fit into.
Required Oil Flow: 15-30 L/min.
Working Pressure: 90-120 Bar.
Breaker Dimensions (without moil or hoses): 873mm(L) x 245mm(W) x 242mm(H), Weight: 100kgs.
Shipping Dimensions (everything strapped to skid): 900mm(L) x 335mm(W) x 430mm(H), Weight: 120kgs.
Should fit: Airman AX08, Hitachi EX 08, Komatsu PC 02.
Maybe fit: Case CK 15, Daewoo Solar 007 / 010 / 015, JCB 801 / 801.4 / 8018, Kobelco SK 07, Kubota KH 05 / KH 12 / KH 35 / KH 36 / KH 41 / KX 30 / KX 36 / KX 41 / KX 41-2 / KX 41-3 / U17-3, Takeuchi TB 07 / TB 108, Wacker Neuson 803 and possibly other machines with similar pin spacings or that have a variable pin spacing hitch (Multi-Hitch).
Call if you would like to discuss or to come inspect it.
We are at Pullenvale, 16km west of Brisbane CBD, between Brookfield and Anstead, near Kenmore.
You can pick up, we can deliver to a reasonable distance for an agreed fee, or we can arrange freight within Australia.
Facebook
Twitter
Email a Friend
PULLENVALE, QLD
Print
******6470 
