Laser rust removal/cleaning machine achieves the cleaning effect through high-energy laser, and laser rust removal is a non-contact processing method, so there is almost no damage to the substrate. There is no need for consumables such as chemical detergents, dry ice, cleaning jets, etc. in the process of rust removal or cleaning. In addition to no pollution to the global environment, it also saves the cost of consumables.
Type DCL-1500
Laser source CW Fiber
Laser Power 1500W
Fiber cable 10-20M
Wavelength 1070nm
Clean speed ?30M²/Hour
Beam width 10-150mm
Scan speed 0-7000mm/s
Cooling Water cooling
Voltage Single Phase 240v
FAQ
Q: What is a 2000W 3000W CW Fiber Laser Rust Removal Machine?
A: It is a high-power laser machine designed to remove rust, paint, and other surface coatings from metal surfaces using a fiber laser beam.
Q: How does a fiber laser rust removal machine work?
A: The machine emits a high-powered laser beam that is absorbed by the rust or paint on the metal surface. This causes the rust or paint to evaporate and break apart, leaving behind a clean surface.
Q: What types of metals can a fiber laser rust removal machine be used on?
A: These machines can be used on a variety of metals, including steel, aluminum, copper, and more.
Q: What are some advantages of using a fiber laser rust removal machine?
A: One advantage is that it is a non-contact, non-chemical method of removing rust and other coatings, which can be more environmentally friendly and cost-effective than traditional methods. Additionally, fiber lasers are highly precise and can remove rust without damaging the underlying metal surface.
Q: What are some applications for a fiber laser rust removal machine?
A: These machines are commonly used in the automotive industry for rust removal on cars and trucks, as well as in the marine industry for removing rust and corrosion from ship hulls. They can also be used in the aerospace, construction, and manufacturing industries.
Q: What is the difference between a CW fiber laser and a pulsed fiber laser?
A: A CW fiber laser emits a continuous wave of laser light, while a pulsed fiber laser emits laser pulses. CW fiber lasers are typically used for applications that require a high power output, while pulsed fiber lasers are used for applications that require high precision and accuracy.
Q: What safety precautions should be taken when operating a fiber laser rust removal machine?
A: Operators should wear appropriate protective equipment, such as safety glasses and gloves, and ensure that the laser beam is not pointed at any living organisms. Additionally, the machine should be used in a well-ventilated area and operators should be properly trained on how to operate the machine safely