OFMER - Rebar Cutting Machines Standard Series [made in Italy]

REBAR CUTTING MACHINES
OF.ME.R. srl operates in the branch of construction machinery for over thirty years, specialized in the fabrication of rebar cutting machines to cut concrete reinforcing steel rods, destined on construction sites.

Performant and reliable products, easy to maintain and use, appreciated in Italy and abroad for their excellent quality-price ratio and for the impeccable sales and after-sales service provided by the Manufacturer.

Every OF.ME.R. labelled cutting machine is structured with safety margins able to tackle the most grueling working rates, common to all largest building sites.

Each detail used for the preparation of our rebar processing units is carefully tested during the mounting process, and the finished product is subjected to rigorous quality control before the shipment.
Motors are strictly made in Italy and designed to optimize and enhance the working capacity of each machine, such as the electrical components, of the best available brands.

Our team of engineers puts its expertise at the disposal of the Customer, to make changes to the basic model – where necessary – and satisfy the needs and peculiarities of each market.

Result of years of experience and elaboration of the market indications and feedbacks, the Standard line of mechanical cutting machines for concrete reinforcing steel rods is undoubtedly the most requested on Worldwide construction sites, thanks to its ease of utilization and maintenance and to the resistance guaranteed by the high quality materials common to all OF.ME.R. products.

It boasts many attempts to imitate, but the high manufacturing volume allows us to offer an excellent quality/price ratio and to maintain a high market share, receiving and responding to an increasing number of requests.

Simplified Lubrication System
The gears and pinions of all the Of.me.r. Rebar Cutting Machines constantly work in an oil bath. In fact, each machine is supplied with the correct quantity of oil recommended for the purchased model, which has to be periodically checked through the special inspection glass located at the bottom of the machine and, if necessary, to be filled up through the hole at the top of the Rebar Cutting Machine.
For all the other parts stressed by friction and wear some small holes are predisposed in the critical points, through which the operator have to periodically grease the desired zone using an hand oil pump.

The special System of Simplified Lubrication, optional to be required in phase of order for all the models of Standard Rebar Cutting Machines, is composed of a single stroke manual grease pump, connected to all the greasing holes of the machines through a system of pipes and ducts.

Thanks to this optional the operator, simply operating on the knob of the pump, will put in pressure the whole system, that will push the grease in the pipes up to the holes of the Rebar Cutting Machine, where special nozzles allow the lubricant gradual and periodic release. At the first use it is necessary to operate the knob more times, up to load the whole system of pipes. Then, pressing the knob once for each processing cycle, the system will provide to the continuous and gradual lubrication. All in a single operation!
As underlined by sector studies carried out by the manufacturers of machineries, the 50% of the faults is attributable to an insufficient lubrication. This shows the importance of simplified lubrication system that ensures numerous advantages:

It minimizes the time of preventive maintenance;
avoids machine downtime reducing the production times;
it extends the life of the connecting rod, of the supports, of the eccentric shaft and of the other parts in movement;
It maximizes the time of production minimizing the breakdowns caused by a lack of lubrication;
the maintenance staff appreciate the ease of use;
the points which are hard to be reached are regularly lubricated.