Precisionscreen FRP Fines Recovery Pod

Fines recovery Pod is used at the end of the sand washing process to help dry (dewater) the sand from a previous stage or concentrate on recovering the fine sand from the waste water before going back to the pond.

Fine Sand recovery is achieved via the on-board 250mm Cyclone fed by the rubber lined pump that collects feed material from the base of the tank. The Cylcone then discharges the heavy particle (ie fine sand) onto the high frequency dewatering screen for draining.

The newly recovered sand can then be deposited to the side of the unit (via screw) or out the front of the pod onto a Stacker. This sand discharge point is optional depending on pod configuration.

Features:


Vibrating dewatering screen
250mm Cyclone with rubber lined pump
Cyclone is on a swing that allows fine material to be stockpiled separately
Cyclone pump and screen driven hydraulically
Large weir area for effluent water 44.8m linear
Optional discharge point from dewatering screen
Designed to work in conjunction with Precisionscreen aggregate washing plants
Built in Australia for Australian conditions