QF Standard Branch 30°

QF Ducting is designed to be installed into a process ventilation or dust collection system. QF Standard Branches are used to port to machine outlets or other duct lines.
Standard branches are 30º, Optional 45º.
When ordering specify ØA, ØB, ØC.

L = ( ØB x 2 ) + 206.
ØC must be smaller than or equal to ØA.
ØB must be smaller than or equal to ØC.
Use formulas above to determine if a reducer is needed at ØC.

Galvanised steel or 304SS construction.

ORDER EXAMPLE:
Branch Std Galv 0,7mm 80QF 80QF 80QF 30Deg