10kN Skid-mount Recovery Winch including Automatic Fairlead
This winch is designed for general recovery work. The winches have variable line speed and are fitted with an Archimedes screw for layer winding the cable onto the drum. This type of winch has been specifically designed for pulling hauling cables through ducts and is usually used in conjunction with 35kN Bull Wheel Winch. The unit is fully self-contained and can be supplied with vinyl cover for storage purposes. The winch features hot dip galvanized frame and is provided with lockable vandal-proof enclosures. All other components are powdercoated.
Specifications
Winch Line Pull 10 kN
Rope Capacity 1200 metres of 14 mm Poly rope
Winch Speed 0-50 metre per minute
Power Pack 15kW Diesel Engine Electric start
Parts Books & Operating Instructions
The equipment is supplied with one copy of an operation manual which includes operating instructions, safety information, major assembly drawings, hydraulic and electrical schematics (if applicable), etc. Additional copies are available upon request at nominal cost.
Change in Specification
Design and improvement of products is a continuous process. We, therefore, reserve the right to make design improvements differing from this specification after receipt of an order. However, any major changes will only be made with the approval of the customer or its' representatives.
Warranty
12 months parts and labour in accordance with guarantee and sales conditions.