40kN Skid-Mounted Recovery Winch
This winch series is designed for general cable hauling and recovery work. These winches are fitted with hydraulic load holding valves and failsafe brakes enabling them to safely be used for hoisting. The winches have variable line speeds with a high-speed selection for faster retrieval and payout.
Winches are provided with hot dip galvanised skid-mount that connects the power pack to the winch assembly. The skid is provided with container lock location points, one on each corner. Winches can be easily lifted using a forklift or a crane. Lifting points are provided on each corner.
Specifications
Winch Line pull at top layer 40kN
Rope Capacity 16mm 500 metres
Rope not included
Winch Speed: Normal
12 m/minute 40kN – 4000kg
Winch Speed: High Speed 24 m/minute 20kN – 2000kg
Power Pack 17.5kW
Engine type Diesel – electric start
Hydraulic oil reservoir 58 Litres with 12 Volt oil cooler
Diesel tank 32 litres
Total weight 2010kg
Overall length 2500mm
Overall Width 1585mm
Overall Height 1780mm
Full Drum 650mm - 40kN (4000kg)
Empty Drum 80kN (8000kg)
Winch
Tension Line pull 40kN (4000kg) constant at low speed
Line Speed 2-Speed auto change via hydraulic motor
- High speed full drum 24 m/min – 20kN (2000kg)
- Low Speed full drum 12m/min - 40kN (4000kg)
Rope 16mm 500 metres
Rope Not included.
Parts Books & Operating Instructions
The equipment is supplied with one copy of an operation manual which includes operating instructions, safety information, major assembly drawings, hydraulic and electrical schematics (if applicable), etc. Additional copies are available upon request at nominal cost.
Change in Specification
Design and improvement of products is a continuous process. We, therefore, reserve the right to make design improvements differing from this specification after receipt of an order. However, any major changes will only be made with the approval of the customer or its' representatives.
Warranty
12 months parts and labour in accordance with guarantee and sales conditions.