This Trimmer Bar has a working width of 300cm. It cuts branches of up to 50mm in diameter. It is usable for the maintenance of all kind of hedges, that are maintained on a regular basis. Due to the working width of 300cm....
Side sucker remover head with simple mount frame, hydraulic side shifting and shockproof articulation with gas spring. The shaft is in alluminium and the screws are in steel to avoid vibrations. The side-shoot remover wh....
Orchard pruner with saw discs and frame with parallelogram side shift suitable for traditional orchard with high max of 6 m. We have available two type of cutting bar, the standard one with 40 cm disc that cut up to 10 c....
Suits Skid Steer Cutting Width 1828mm Required Operating Flow 75-115L min Operating Pressure 16MPa Shipping Dimensions 2240mm L x 2090mm L x 620mm H Weight 500kgs....
Cat Industrial Brushcutters are designed for land management, utilities, site prep and maintenance work for brush, small trees, and dense vegetation. These machine and work tool combinations are designed to bring unparal....
Frame with connection euro 1 for mounting on front loader and telehandlers. BRP can mount a sickle bar or disc saw bar for cutting up to 15 cm of branches. The frame as 2 hydraulic movements controlled by a joystick. Dat....
The HKL Fox frame is an further development of the HKL Ex frame. It was our goal, to be able to provide a frame for extreme working conditions and heavy loader carrier vehicles like construction machinery etc. The HKL Fo....
New high density-spindle orchard pruner suitable in all kind of varieties like apples, apricots, cherries, olives until 4m 13 high of the trees. The single acting sickle bar with SCH teeth can work with branches up to 3-....
Mini Digger Finger Bar Hedge Cutter Attachment Available in 1.5m and 1.8m options there is a Slanetrac HC Series Mini Digger Finger Bar Hedge Cutter Attachment to suit a wide range of machines. The robust low maintenance....
Hedge bush cutter manufactured with a particular geometrical shape able to overcome and work over obstacles such as bushes, nets or rows. The arm on which is mounted the working head is telescopic to adapt better to the ....
Double SRV head mounted on the TOWER 2 frame for front mounting. The machine removes the side shoots and at the same time cuts the grass in vineyards. The push version is much more user friendly than the pull version. It....
The HKL Mini frame is suitable for lightweight carrier machines and mini loaders. The HKL Mini an hydraulic tilt function, that enables the cutting tool to rotate seamlessly between its vertical and horizontal positions.....
Pruning machines Vision are characterized by a better front visibility and a better performing inclination of vertical bars which makes them suitable for use in the hills. The model Vision 2 has got the ability to adjust....
The orchard pruner is suitable in different types of cultivation like cone and mono-cone or high density for machine harvesting. The frame has 4 hydraulic movements acting by a joystick and it can mount 1 or 2 saw discs bars which works with branches up to cm 8-10 3-4 . The machine with 2 bars cuts the side and the top in the same time. It is supplied standard with a independent hydraulic kit with oil cooler which provides the right oil flow for the cutting bars. ....
The HKL Standard frame is developed for mounting onto loaders and excavators etc. The HKL Standard is a simple, yet very robust frame. The HKL Standard frame has hydraulic an hydraulic tilt-function, for the stepless adj....
All of Elkaers saws have been designed with offset blades in order to avoid the branches getting jammed, thus enabling you a relative high speed of work. The HS2300 is very efficient cutting heavy hedges and shelterbelts with branches up to 250mm in diameter. The HS2300 saw is equipped with 3x 800mm sawblades and it is compatible with most of our loader-frames and reach arms to be mounted onto loaders, tractors, telescopic handlers or excavators. ....
The HS1750 has been developed to suit the dimensions of mini-loaders, smaller tractors, e.g. park tractors. The HS1750 is equipped with 3x 600mm sawblades, which enables it to cut branches of up to 150mm in thickness. The HS1750 is well suited for the purpose of maintain all kinds of hedges, bushes and trees, and it will effectively cut branches with clean cuts. The work speed is normally about 4 km h, and up to 8 km h at max., which gives this hedge saw a great work-capacity. The HS1750 is compatible with all Elk r reach arms, and can be mounted to reach arms and booms from other ma....
Rover R4400 Cordless Hedge Trimmer Including Lithium Ion Battery And Charger Located At Melbourne....
Testimonials
"Extremely pleased with response to ad, well exposed site."
- John Feil
No Commissions
