SCM Gabbiani P75 Automatic Beam Saw

The SCM Groups Gabbiani Beam Saws are Proudly Made in Italy.

The Gabbiani P75 is the ideal solution for small-sized companies.
Single-blade beam saw controlled by PC/PLC control system, designed to cut solid wood panels or panel stacks and its products (chipboards, MDF panels, multilayer panels, plywood panels and fibre panels). The solution to integrate the beam saw inside a flex store s or flex store el storage.

Selectable air blowing table: an essential tool.
The possibility to enable/disable the air blowing device on each table section via independent motors, ensuring optimal sliding of the panels only where it is needed and avoids accidental falling of cut panels temporarily stored on the tables.

Saw carriage with independent raise of the blades.
Essential tool for machining post-formed panels in order to optimise cycle-time machine and enhance cut finish.

FLEXCUT unit: incomparable flexibility and productivity.
Increasing of productivity up to 30% and space saving up to 20% owing to the simultaneous execution of both rip and cross cuts.

Floating clamps: the guarantee of the end result.
The special shape of the clamps allows safe grip of panels at the maximum speed and perfect parallelism even when panels are not perfectly planar.

Technical data
Gabbiani P 60 Gabbiani P 75
Cutting length mm 3300/3800/4300 3200/3800/4500
Blade projection mm 60 75
Saw carriage variable speed m/min 0 - 120
Pusher variable speed m/min 0 - 70
Main blade motor kW 7 (9) 7 (9) (11)
Scoring unit blade motor 50 Hz (option) kW 1,3
Main blade / scorer speed 50 Hz rpm 4650/5850
Main blade / scorer blade diameter mm 300/200 340/200
Number of clamps std 5