BRAND NEW SCM ST3C Saw Spindle Combination Machine
The SCM Minimax ST 3c (classic)
SCM’s Minimax saw & spindle moulder (shaper) combination machine.
It is very similar to the Minimax SC 3 Classic, but with the shaper added.
The sliding table is 2600 mm long
The parallel (rip) cutting width is 1270 mm
It comes standard with an outrigger table and eccentric clamp.
Technical features
Circular saw:
- cast iron saw-spindle moulder worktable dimensions 1115 x 430mm
- blades tilting 90°/ 45°
- max. saw blade diam. with scoring blade installed 315mm
- max. saw blade projection from table at 90°/45° 100/78mm
- max. squaring stroke (standard) 2600mm
- cutting width on parallel fence (standard) 1270mm
Spindle moulder:
- max. useful spindle length 100mm
- spindle moulder speeds (at 50 Hz) 3500/7000/10000 RPM
- max. tool diameter when profiling 210mm
- max. diam. of tool lowered under the table at 90° 180mm
Other technical features:
- Single-phase motors 2.2kW (3hp) 50Hz (Each unit)
- exhaust outlets diameter 120mm
Spindle moulder available with following diameters: 30mm (Std)
There are quite a few upgrade options available. These include a tenoning table and hood for the spindle moulder, digital readout for the fence position, a wheel set, and a shorter fence for quick angled crosscuts.