Seppi H-SMO-B mulcher for orchards, forestry and agriculture

Seppi H-SMO-B Mulching mower – attachment for excavator 150-250 bar | 40-140 l/min [2175-3626 psi | 10.5-37 gpm]

Mulching mower for excavators from 5 to 13 t.

Mulching of grass and brush up to 7 cm [3”] Ø
The model H-SMO-B™ is a strong and versatile flail mulcher for maintaining wasteland and areas difficult to access. This hydraulic attachment is trong and universal mower to be mounted on tyre or tracked excavators for maintaining

overgrown areas and slopes, land clearing, right of way management and green spece maintenance.

H-SMO-B mulching head is Prepared for an individual interface plate for excavators of different brands. The rear hood allows the adjustment of the degree of mulching. With the stong support roller it is possible to adapt to the contours of the ground and to adjust the height of cut. Mechanical float adaptor follows the contours of the ground.

Available working width: 125, 150, 200 [49?, 59?, 79?].

STANDARD VERSION
Mulching head suitable for excavators from 5 to 13 tons
Mulches grass & wood up to 7 cm [3”] Ø
Standard rotor with SMO™ flails
Predisposed for interface plate (universal for different kind of excavator attachments)
Predisposed for transmission with hydraulic motor of choice
Recommended oil flow: 40-140 l/min [10.6 – 37 gpm]
Adjustable rear hood
Front protection with chains
Rear protection: safety rubber flap
Reinforced support roller, adjustable in height by 5 cm [2”]
Colour: yellow
OPTIONS
Rotor with Y knives
Variable displacement motor with relief valve, different types at choice
Attachment – interface plate for excavators of different brands
Mechanical float adaptor
Interface plate with 190° rotation
Side discharge conveyer belt XTR