Silence Hydraulic Hammer UBT40S Post Driving Hammer Tractor Front End Loader ATTUBT

UBTECH UBT40S Tractor Front End Loader Silence Hydraulic Post Driving Hammer
Rock Concrete Breaker WORK READY-----ONLY $12,500.00 +GST

UBTECH UBT40S Tractor Front End Loader Hydraulic Post Driver. Post Driving Hammer to suit 3 to 7 Ton Tractors (FEL).

** Drives Posts 2500m to 3000mm in Overall Length (depending on the specifications of your machine performance will vary)

e.g. Terex PT50 achieves 2.7m overall available height from ground to inside of post driving moil.

UBTECH Hammers are manufactured in South Korea as with hammers available on the market today. PROVEN QUALITY AND VALUE FOR MONEY.

5 Years Warranty on Main Frame & 12 Months Factory Parts Warranty. *Factory warranty does not cover everyday wear parts, consumables or everyday maintenance issues. UBTECH Hammers are the heaviest in the market we have seen. When comparing weights of hammers it is important to consider whether the head bracket, hoses and moil are included!

All hammers are sold WORK READY with no surprise costs when it comes to fitting your hammer to your machine, come complete with moil, hoses and head bracket installed. Hydraulic hoses supplied standard with screw-in fittings. Simply attach to the excavator and begin work with your breaker pre-gassed, flow and pressure tested, and fully adjusted to suit your machine.
______________________________

UBT40S, to suit Toyota Skid steer 5SDK9 5SDK10 5SDK11

. Gross Weight----------------340kg (without Head Bracket, Moil, Pins, Hoses)
. Required Oil Flow----------30 to 70L/min
. Operating Pressure-------95 to 130 bar (1380 to 1885 psi)
. Setting Pressure-----------170 bar (2465 psi)
. Tool Shank Diameter----68mm (2.67 inches)
. Impact Rate------------------500 to 900 bpm
. Hose Diameter-------------12.7mm (1/2 inch)

All units come complete with:
. 1 x Front End Loader Mounting Plate
. 2 x Hydraulic Hoses (1.5m x 1/2?)
. 1 x Tool Kit
. 1 x Recharge Kit
. 1 x Full Seal Kit
. 1 x Chisel Attachment
. 1 x Moil Attachment

. 1 x 100mm Post Driving Moil (75mm Internal Diameter)
. 1 x 226mm Post Driving Moil (200mm Internal Diameter)