Slinet S 1.5 - 1,5 with 5 knifes
Automated knife adjustment
With it is up to 8 knife automated knife adjustment the production of
blanks for profiles and flashing's can be made fast and easy without
manual knife adjustment.
Cross cut
The cross cut is made by a roll knife. This cut will not be made from the
top as usual. The industry innovation of SLINET allows the cross cut from
bottom up. This innovation eliminates scratches which occurs during
material handling as the small grade goes up not down.
Technical information:
Max. width:
Cutting capacity: 1.250 mm
Steel 400 N/mm² 0,4 - 1,50 mm
Stainless Steel 550 N/mm² 0,4 - 1,0 mm
Alu 190 N/mm² / Kupfer 0,5 - 2,00 mm
Smallest cut: 60 mm
Cutting precision: DIN/ISO 2768 (± 0,8 mm/m)
Overlap adjustment: 0 - 0,75 mm
Slitting: Made by 5 roll knifes
Cross cut: Roll knife
Elektric: 3 PH 400-480V AC/PE
Air preasure: 100 Liter/min , 6 Bar
Dimensions L x B x H: 2000 x 2300 x 1500 mm
./watch?v=G2P8BokpY1U
Coil storage system up to 2 To. incl. coil lifter and 6 axes to suit Slinet SI 1.5
An industry innovation is the dynamic coil storage system by SLINET
which is different than all existing systems on the market.
In standard the system is made for eight 2 tone coils. The difference is
that the storage system of SLINET does not work with fix stations for each
coil. The storage system works dynamic. By using each individual
outside diameter of each coil the storage system positions the coils not
on a fixed station. It optimizes the space automatically. On the same
space up to 10 coils can be stored. The storage system is driven by high
precise servo motor which works full electric. Each coil axes has an
unique ID. Depending on the remaining outside diameter of each coil
the axes can be positioned very close to create additional space. The
system can be extended flexible to the requested requirements.
./watch?v=PI6BC5jx9y0