TRADEQUIP Portable Air Conditioner 6.5KW

A 'plug and play' portable aircon for workshops or office space.

Just wheel it in, plug it in and it goes to work immediately.

The units bring in air from an outside source to cool its condenser, cycling hot air to an outside source. Direct the exhaust tube towards a window opening or doorway and the unit extracts heat and expels it.

Up to 10°C temperature differential across their coil means 39°C input air will instantly produce 29°C output air.

Though compact in footprint, the 1033T is the large unit in size and capacity in the TradeQuip air conditioning series.

These portable air cons are completely self-contained and housed within an insulated cabinet. The unit’s exterior is constructed of durable galvanized steel and protected with a tough powder-coated, polyester finish.

Ideal Applications
Spot cooling people and workstations
Office spaces & rooms
Workshops
Areas where electrical equipment creates a heat load
Warehouses and other commercial spaces
This product is an Industrial Product and not suitable for household use. This appliance is intended for air conditioning industrial or trade workshop/office environments. It is not suitable for any other purpose such as drying clothes, cooling food, etc.

Installation
The 1033T runs on a standard 240V/15A Australian circuit with automatic restart after a power failure. The unit comes with a 5-Litre self-contained condensation tank, that is manually emptied. Installation takes less than ten minutes for easy setup.

Cooling only, not reverse cycle
Compact yet powerful
Runs on 240V 15A circuit
Wide operating range of 18º- 45ºC
Single duct system for easy installation
5 Litre self-contained condensation tank for easy removal and emptying
Effectively cool a person or equipment within 2-5m of the unit.
Capillary tube construction for simplicity
Heavy duty compressor with automatic restart and short cycle protection
Motors and compressors have overload protection
Durable and long lasting steel construction
Heavy duty locking castors and handles for easy manoeuvrability
Easy to use plug in and place the hot air duct out of window/door or into false ceiling.

Cooling Capacity: 6.5KW / 22000Btu
Power Unit: 240V 50Hz
Rated Power: 3000W
Rated Current: 13.5A
Max. Air Flow: 1200m3 per hour
Noise Level: 65dB(A)
Operating Temperature: 18° - 45°C
Suction Pressure: 2.5Mpa (Max.)
Discharge Pressure: 4.5Mpa (Max.)
Speed Control: 2-speed
Refrigerant: R410/800g
Condensation Tank Capacity: 5 Litres
Castor Wheels: 75mm Dia (2 with brakes)
Dimension: 1245(H) x 640(W) x 560(D)
Nett Weight 100kg
Gross Weight 155kg