Loader is a mechanical level lift design
The arms are made from tappered segments providing maximum strength with optimal pin weight
Pins are plated and greasable
T413 Front End Loader Quick Detach
The loader is quick-detach to the tractor via simple quick release pins
Integrated stand is provided for loader storage on hard surfaces
The loader mounting frame is connected to the rear axle via a rail. This provides greater strength to the loader frame to avoid damage to the tractor when pushing heaped material
FEATURES
Bucket level indicator
Easy visibility of indicator rod from drivers seat when bucket edge is parallel to the ground
Grille guard protection frame
ATTACHMENT
Implement attached to the loader is via a Euro-Hitch connection allowing easy attachment of other tools and implements to the loader
Easy connection and disconnection of attachments from the loader via a single lever
The loader is fitted standard with 4-in-1 bucket providing 4 implements in one: conventional bucket scoop; grab for carrying; and blade and back blade for leveling
The 4-in-1 bucket needs a third hydraulic function and this is standard on the loader controls
CONTROLS
Loader is fitted with integrated joystick controls for the raise/lower and crowd/dump functions
The integrated joystick allows unobstructed access from either side of the tractor
The 4-in-1 bucket is controlled via a trigger button on the joystick to alleviate fatigue compared to thumb operated style controls
Joystick has a safety lock to prevent inadvertant operation
SPECIFICATIONS
T413 4-in-1 Loader
Loader model TX3500H
Tractor models T413 HST ROPS, T413 CAB
A. Maximum lift height (mm) 2,597
B. Clearance with attachment level (mm) 2,332
C. Clearance with attachment dumped - 45 degrees (mm) 1,864
D. Reach at maximum height - 45 degrees (mm) 554
E. Maximum dump angle (degrees) 42
F. Reach with attachment on ground (mm) 1,792
G. Attachment rollback angle (degrees) 35
H. Digging depth below grade (mm) 111
J. Overall height in carry position (mm) 1,550
L. Depth of attachment - to back of inner shell (mm) 579
M. Height of attachment (mm) 563
N. Depth of attachment - to pivot pin (mm) 801
Lift capacity to full height of pivot pins (kg) 926
Breakout force at ground level, pivot pins (kg) 1,556
Rated operating load - (counter weight on 3PL) (kg) 450 (350)