Welcome to Old Talgai, your destination for the best equipment in Australia. Our range includes portable sawmills, log splitters, stump grinders and wood chippers all designed to make your work easier and more efficient. Whether you're milling hardwood, splitting logs, removing stumps or turning unwanted branches and timber into useful woodchip our high-quality equipment is up to the task. Shop our range now and see the difference for yourself!
Weight: 294.00 kg
The Woodland Mills WC46 PTO driven wood chipper was designed to work with sub compact tractors with 15 to 30 HP at the PTO and features an auto hydraulic infeed system, direct drive, a 4in x 6in (10 cm x 15 cm) opening and 360 degree swivel discharge chute
TECHNICAL SPECIFICATIONS
Drive System: Tractor PTO
Transport: Tractor 3 Point Hitch
Minimum HP Required (at the PTO): 15
Maximum HP (at the PTO): 30
Hydraulic System: Standard NPT Fittings & Valves
Hydraulic Oil: 17 L / 4.5 gallons of ISO 46 or ISO 68 (warmer climates)
Hydraulic Pump: Belt Driven
Flywheel Diameter/Thickness: 18" x 3/4" thick (46cm x 2.0 cm thick)
Flywheel Speed: 540 RPM
Flywheel Drive System: Direct Drive
Flywheel Housing Design: Easy To Open Clamshell (for easy clean out and blade changes)
Flywheel Housing Thickness: 5/16" (8mm) Thick
Flywheel Shaft: 2" (50mm) Diameter
Number of Blades: 4 Reversible Blades
PTO Shaft: Shear Pin Protected PTO Shaft Included
In-feed System: Self Contained Hydraulic System
In-feed Drive: Forward/Neutral/Reverse With Variable Speed (0-75 ft-min) / (23 /min)
In-feed Roller Size: 5.25" (13cm) Chisel Tooth
In-feed Opening 4" tall x 6" wide (10cm x 15cm)
In-feed Roller Pressure: Adjustable via Spring Tension
Quick Hitch Compatible: Yes
Chipper Base: Laser Cut Plate Design
Finish: Powder Coat Paint
Warranty: 3 Year
Product Weight: 550 lb [250 kg]
Shipping Weight: 648 lbs (294 kg)
WC46 4" PTO Wood Chipper
The Woodland Mills WC46 PTO drive wood chipper was specifically designed for sub-compact tractors with 15-30HP at the PTO. Featuring a hydraulic infeed system, the WC46 is capable of chipping up to 4” (10cm) diameter material. The WC46 is a good fit for customers with sub compact tractors that feature the following: 1) Rear PTO that spins at 540RPM HP at the PTO 3) Ability to lift 550lbs (250kgs) at the 3 point hitch system.
Capacity
The WC46 operates on tractors with 15-30 HP at the PTO. It utilizes a large 19” x 18.5” (48cm x 47cm) infeed hopper opening that tapers down to a 4” x 6” (10 cm x 15 cm) opening where the 5.25” (13cm) diameter hydraulically driven infeed roller grabs the branches and feeds them through the chipper. Branches as small as ¼”(6mm) diameter and as large as 4” (10 cm) diameter can be fed through the WC46. To chip full 4” (10cm) diameter logs at full infeed speed, tractors with over 20 HP at the PTO is required.
Hydraulic Infeed System
Branches are pulled into the WC46 via the 5.25” (13cm) diameter infeed roller. The roller is hydraulically driven via the chippers self contained hydraulic system. The roller is adjustable in direction and speed making it easy to feed branches of all shapes and sizes. The hydraulic pump is belt driven from the main flywheel shaft. The roller down pressure may be adjusted via the two large springs ensuring it grabs branches and easily pulls them in, eliminating the need for manual feeding.