Wheeled Excavator – EW65

The wheeled excavator EW65 drives itself to the site of application thanks to the installed street driving mode and does not require a time and cost-intensive transport. The variable drive system with up to 20 km/h has low fuel consumption and with just one pedal drives almost like a car. The powerful load-sensing hydraulic system with LUDV* (load-independent flow control) also provides for the same speeds of several movements with different loads. With 5 control circuits — of which 3 are individually adjustable — and an articulated boom, the EW65 is very efficient and its way quickly.


Precise and sensitive operation thanks to the load sensing hydraulic system with LUDV (load-independent flow control)*
Low consumption due to the economical ECO mode
Up to 5 auxiliary control circuits for the most varied attachments
Maintenance and service made easy due to the tiltable cabin as well as the diagnostic tool

EW65 Standard components

General

Mono tires (300-15)
Dozer blade (rear) + Bracket for grabber (front)
Working light mounted to the boom
Working lights front left and laterally left and right on the chassis
Tool kit incl. grease gun and operator manual

Engine

Air filter with integrated cyclone pre-separator
Idle speed autom. operation

Cabin

Glazed tiltable safety cabin: cabin heating, sliding side window, inward retractable windshield – rain roof position, windshield wiper / washing system, fully lined cabin interior, armrests
Cabin complies with the current ROPS, TOPS and FOPS* regulations
*FOPS (level I or II) only when fitted with additional protective guard
Radio pre-installations (cables, speakers, antenna)
Cabling (headlight and rotating beacon)
3 exterior mirrors (1 on the left side of the cabine, 2 on the right side of the chassis)
Roller sunblind

Hydraulics

Load-sensing system with 2 variable pumps (144 + 85.5 l/min)
Hydraulic pilot control via joystick
Valve control according to ISO, DIN, SAE, PCSA and EURO
Auxiliary hydraulic connections for two directions of movement, mounted on dipper stick
Front axle: Hydraulically steered planetary drive axle with multi-disc brake
Rear axle: rigid planetary drive axle
Hydraulically dampened drive pedals and lever
Hydraulic oil cooler
Proportional control aux.hydr. – AUX I
Overload system Advanced