Wood-Mizer KD250 Dehumidification Wood Kiln

High-quality dehumidification wood kiln for controlled timber drying of 3.54m³ to 9.43m³.

If you think high quality timber drying is too complicated or expensive, you’re in for a pleasant surprise with the KD250. Now you can dry your own timber down to 6-8% moisture content for pennies per board foot. With up to 9.43m³ capacity, the KD250 includes auxiliary heating, two 406.4 mm, 1/4 HP circulating fans, prewired electrical panel, manual over temperature vents, four wood moisture probes, and controls that display temperature and humidity by the most accurate method known with wet bulb and dry bulb sensing.* Chamber not included. Call for details about different chamber options that may fit your needs.


Specifications
FEATURES & OPERATION
Auxillary Electric Heat 4,000 watts
Circulating Fans 2 included: 40cm(16”) diameter .2kW (1/4 hp)
Compressor Nominal HP 1.5kW (2 HP)
Internal Blower Motor HP .2kW (1/4 HP)
Operational Costs Varies depending upon wood species
Over Temperature Vents Two manual vents included Powered Vent Included
Temperature Range 20°-50°C (70°-120°F)

DIMENSIONS & REQUIREMENTS
Height .94m (37")
Length .95m (37 1/2")
Width .52m (20 1/2")