XCALIBUR URAS-450A Radial Arm Saw

XCALIBUR URAS-450 RADIAL ARM SAW WITH LASER GUIDE
SPECIAL ELECTRIC BRAKE MOTOR

Specifications
§ Heavy duty machine with ribbed cast iron arm.
§ Arm mounted on large vertical column for rigidity.
-§ Pressed steel base and legs support column and work table.
§ Automatic saw carriage return spring device provided.
§ Interchangeable hard chrome steel slide rails
§ Three-way head movements allow a variety of options –
1. Blade tilts down from vertical, 90 degree maximum, to horizontal position.
2. Head swivels around 90 degrees to allow ripping of timber.
3. Arm swivels around 45 degrees to left or right, to allow angles to be cut.
4. A combination of No.1 and No.3 allows compound angles to be cut.
§ Top half of TCT saw blade covered by metal safety guard.
§ Bottom half of blade protected by side guards that lift over workpieces.
- Laser cutting device
- 2 x 100mm dust collection outlets

Technical Data
Motor with electric brake 3phase/425 volt/6hp
Motor speed 2850 rpm
Diameter of standard TCT saw blade 400 mm
Motor arbor diameter 30mm
Maximum cross-cut capacity 400 mm
Maximum depth of cut 90 mm
Maximum ripping width capacity 600 mm


Work table size 800 x 1220 mm
Overall dimensions 1120 x 1100 x 1170 mm