YLM - Double finishing & Double-bend tube bender - CR-F38D [made in Taiwan]

The machine (CR-F38) is an improvement of CR-T38. It is capable of providing more than 3 different processing methods and is called "universal machine" in the field of doublebend processing. This machine comes with 2 rotary.

• This machine (CR-F38) is an improvement of CR-T38. It is capable of providing more then 3 different processing methods and is called "universal machine" in the field of double bend processing. This machine comes with 2 rotary tables.
• The rotary angles can be set up according to the shapes of work-pieces.
• This machine is flexible. It can do both front side bending (same as CR-T38) & inside bending. Besides, this machine can be simply used as single-bend pipe bender.
• The feature of the pipes made by this machine:
- Excellent surface flatness and angle.
- Quality stable.
- Beautiful appearance without wrinkles.
• Two shafts can do different angles bending. Both of these 2 angles can be adjusted freely from 0° to 180°.
• Production capacity: produce 720 pcs (Max.) of pipes with two-end bending.
• The distance between the center line of 2 main shafts:
• Front-side bending: 140 m/m (Min,) ~ 1,100 m/m (Max.).
• Inside bending: 150 m/m (Min.) ~ 900 m/m (Max.).
• Production capability:
• Front-side bending: (Same as CR-T38)
• Produce 1 pipe each time for O.D 38m/m pipe.
• Produce 3 pipes at the same time for O.D. 19 m/m pipe.
• Inside bending: Produce 1 pc each time for the O.D. 38 m/m & smaller pipes.

The CR-T38D and CR-T50D are NC controlled with the ability to bend multiple tubes at one-time. The Bend angles can be adjusted to bend at the same angle or two separate angles.

The YLM Double Head Benders are the best choice for high production two end bending.
YLM Double-Head Benders are suitable for these industries Automotive, Furniture, Hardware, or parts requiring symmetrical bending.

The YLM CR-F38D has the same features as the CR-T38D but is also capable of bending parts with bends on more than one plane. To do this the bend heads are mounted on two rotary tables that can be adjusted to perform multi-plane bends.

Double-Head Bender Features:
• Proportional pressure controlled hydraulic driven rotation of wiper around the bend die
• Hydraulic clamping of tube between bend die and clamp block
• Hydraulic actuation of pressure die
• Adjustable bending angles from 0 to 180 degrees
• Each side can be set to different degree of bends
• Automatic or manual operation
• Each side speed controlled individually
• Easily accessible multiple Emergency Stops
• Possibility to adjust timing between each motion
• Safety scanners and light curtains (optional)
• Material profiles that can be bent on a Double-Head Bender:

Round Tube or Pipe
• Square or Rectangular Tube
• Angle Iron
• Solid Bar
• Aluminum Profile
• Metal section